Alright it's done. I decided to try my hand at making tha hardness vary from tip to base again. I poured 2 colours, red for the A10 silicone and black for the A20. It also has a suction cup and a fitting for a bullet vibrator. I should say that the cup goes a little too deep so a bit of the...
Started working on this thing. Has an insertible length of 22 cm (11 inches) and a peak diameter of around 5-6 cm (2-2.5 inches). Just a few finishing touches and I can start working on the mold. Pictures in the google drive link...
Made this for someone recently. Around 8 inches inches insertible length and knot circumference of 4.5. Weight of 900 g (around 1.8 pounds), made by pouring shore A10 and 20 platinum silicone together. Green and Black collors. Has a suction cup and a fitting for a vibrator. I used a 9cm (3.6...
Another project completed. I got it done quicker than expected. It cost around 85 euros to make, weighs 1.6 kg and has shore A20 hardness (medium soft). I think I didn't perfectly set it up in the water bucket when I casted it so it leans slightly forwards and to the side but can stand on it's...
I finished another model today. I will proceed to making the mold tomorrow. Materials for casting should arrive either on Thursday or Friday. If everything goes well I should be able to finish it by the end of the week.
Well we can try the Greek postal service instead of DHL next time. They're much cheaper but it would take a month or more to get to you. If there's anything else you'd like me to make let me know.
It's done folks. Process was a bit of a messy clusterfuck as I haven't done this in some time but it did turn out ok in the end. Hope you enjoy seeing it as much as I did making it.
It's been a while since the last time I made this stuff, but I decided to try my hands at another project. I finished sculpting the model yesterday and now I'm making the mold. Was somewhat troublesome since the clay started cracking. I took some measures to save it and hopefuly everything goes...
Hello there. I got into making dildos for myself a while back. I think I've gotten competent enough at it to start making toys for others. Thought I might be able to use my silly hobby to brighten other people's lives a bit and get chances to practice more this way.
I only charge for the...
Hmm maybe 16-22 cm insertible length and a max diameter of 5-8 cm. I bought a knotted dildo before that was in that sort of range. It's good for loosening up. I could also sculpt a clay model for a dildo. Maybe I can make a shape you'd like.
I'd like to do that. Problem is I have no experience in how to sell and ship stuff. I can try to custom make something for you from scratch if you'd like me to.
The first one has an insertible length of roughly 30cm and a max diameter of around 8 cm and the more alien looking one has an insertible length of roughly 34 cm and a max diameter of 6cm. I'm somewhat off though since I don't have any good instruments to measure. Point is, they're big ones.
It's finaly done. The shipment for the materials I needed was delayed by more than a week unfortunately. I screwed up the coating a bit so it's not 100% even but it turned out just fine. I'm happy with the result and tested it and it was great. For some reason I can't upload the images here so...
So yesterday I decided I'll be making another dildo. Just finished the model for it. That was the easy part. Now I'll start making the mold for it. I should get to the final result by the end of the week hopefully and I'll post more pictures once the project has been completed. Sorry the pics...
Here's the result! I let the silicone degas on it's own since I don't have a vacuum or pressure pump. I wasn't able to completely remove the air bubbles but I added a coating of silicone by hand. The surface is almost completely smooth.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.